M A G N U M
E - SERIES
FORM * FUNCTION *
VALUE
|
 |
E-Series Specifications
Frames:
Three and two inch round, eleven gauge tubular steel is bent for maximum
structural integrity and aesthetic appeal. Most frames are robotically
welded, rater than bolted, except where breakdown is necessary for delivery
through a standard doorway.
Weight Stacks: Solid cold rolled steel with durable baked
powder coat. Plates fitted with Teflon brushings for smooth travel. Stacks
supported by solid rubber blocks.
Fine Tuned Resistance:
All machines fitted with supplemental weight stack allowing for five pound
increment increase. Supplemental stack raised by center of main stack to
assure smooth operation.
|
TRICEP PUSHDOWN
{MODEL 2013}
|
|
 |
Weight Stack & Upper Pulley Shields:
To prevent accidental contact with moving parts, all machines have ABS
molded plastic enclosing the upper pulley and the back side of every weight
stack.
Guide Rods:
Smooth weight transfer is assured utilizing
5/8" polished solid ground, cold drawn steel rods with a hard chrome finish.
Cables:
Weight stack transfer utilizes 7 x 19 (3/16")
lubricated steel aircraft cable coated with nylon to 1/4" . Tensile strength
rated at 4,200 lbs. Machines use positive, four bolt attachment blocks on
weight stacks and machine end for infinite cable adjustment.
|
BICEP CURL
{MODEL 2011}
|
|
 |
Seat & Pad Adjustments:
With one hand, from the seated position, users can glide the pad system on
linear rods, and bearings aided by a gas shock. When appropriate, the back
pad is fitted with built-in lumbar and cervical support. Back pad moves in
unison with seat to maintain support. Lever handle is fitted with a yellow
sleeve for easy identification as an adjustment.
Three Layer Pad Construction:
Backboards are 3/4" plywood anchored with 3/8" x 17 T-nuts with glued
rebound dense thick foam. Seat and back pads have a minimum of 2" thick foam
wrapped inside a thin layer of perspiration proof plastic. They are then
wrapped with a layer of matting material which cushions and protects the
upholstery from contacting the edge of the backboard. Cover material is
double stitched, superior grade, sulfide stain resistant Boltaflex.
|
BIANGULAR CHEST
PRESS
{MODEL 222}
|
|
 |
Upholstery Material:
Boltaflex
ColorGuard 2000. Sulfide stain, oil, and mildew resistant. Active
bacterial and superior disinfectant resistance. Outstanding abrasion
resistance. Palette of over 80 colors with optional two color tone
schemes at no additional charge.
Handles:
Ergonomically designed handles give proper hand position throughout
full range of motion. Multiple hand grips provide users various
exercise options, while maintaining efficiency and safety. Triple
pivot handles, on the 2220 & 2235, allow the user freedom to rotate,
supinate and/or pronate throughout the exercise. |
LEG CURL
{MODEL 2002}
|
|
 |
Cams:
Unit
specific designs, matched to the relevant strength curve, are manufactured
from solid steel and cut with our CNC plasma torch to exacting
specifications.
Protective Feet:
Machines are fit with ABS plastic feet with
one or more adjustable to level machines.
Instructional Placards:
Large easy to view and read placards highlight, with color photos, start and
finish exercise positions and targeted muscles used. |
SEATED LEG PRESS
{MODEL 2203}
|
|
 |
Selector Pins:
Both easy to recognize and adjust yellow knob weight stack selector pins are
tethered to stack. Pins are fitted with a magnet that locks them to weigh
stack
Pulleys:
Fiberglass reinforced nylon V-groove cut pulleys are fitted with
prelubricated ball bearings and fully enclosed when they are mounted to a
machine.
Counter Weighted Arms:
Lifting arms are counter weighted, where applicable, to effectively
eliminate their weight when lifting the top plate. |
LAT PULLDOWN
{MODEL 2235}
|
|
BACK
*
NEXT PAGE
|
OUR
PROGRAM
SUCCESS
STORIES
CORE SPINAL SYSTEM
OUR EQUIPMENT
RATES
NUTRITION 
